top of page

Benefits of our Engraving Machine


Our milling and engraving machine offers you significant advantages over other engraving solutions.

graviermaschine-cnc fräsmaschine-vorteile-engraving machine-cnc milling machine-advantages.jpg

Higher surface quality and shorter process times with the CNC engraving machine

Especially for high machining depths and engravings, which are intended for the lifetime, our engraving machine offers you significantly shorter process times compared to laser machining. The chip volume or material removal per pass is significantly higher here and the process time is reduced accordingly. At the same time, with our engraving and milling machine, you achieve the highest surface qualities, which do not need to be reworked.

Innovative machine design leads to increased stability and rigidity

The unique machine design of the engraving machine results in significantly higher rigidity. Only through the increased stability can machining operations with significantly larger chip volumes be performed. Our milling machine can therefore be used not only for simple engraving work but also for more complex milling with larger tools. This offers you increased flexibility and shorter process times. You achieve better surface qualities and longer tool life due to the rigidity.

Better tool life due to minimum quantity lubrication in the engraving machine

The ENGRAVER engraving machine has an integrated minimum quantity lubrication. This permanently cools the tool and lubricates the cutting process. The MQL brings the advantages of increased tool life and surface finishes to your workpieces.

Automatic tool change during machining

Our CNC engraving machine has an automatic tool change. This allows you to easily store up to 23 machining tools in the tool magazine. If you need another tool during machining, the CNC milling machine automatically changes the tool and continues machining. In addition, the various tool lengths are automatically measured and corrected. Thus, even complex milling or engraving operations are possible in one piece and without manual intervention.

Electronic height correction for curved or uneven workpieces

Our milling and engraving machine has a patented measuring system for the application of electronic height correction. The workpiece surfaces are measured before the actual machining. The advantage comes from omitting a mechanical engraving depth regulator. The concept of an engraving depth regulator is based on spring preload and counterforce sleeve. The tip of the engraving tool protrudes from the counterforce sleeve with the size of the engraving depth. The sleeve sits on the engraving object and permanently grazes the workpiece surface during machining. Chips can get between the counterforce sleeve and the workpiece and scratch the usually very sensitive surfaces. In addition, the engraving depth must always be set manually. Another problem with depth controls is that only one engraving or cutting depth can be used during engraving. If the engraving depth does not correspond to the allowed cutting depth of the tool, the engraving depth regulator must be readjusted after each cutting plane. In most cases, the engraving depth does not correspond to the allowed cutting depth of the tool.

CNC engraving machine - Mechanical engraving depth regulator

Conventional mechanical engraving depth regulator with grinding sleeve and protruding engraving graver

With the ENGRAVER, such problems are a thing of the past. Because here uneven workpiece surfaces are compensated electronically. The cutting depth and engraving depth can be set in the software depending on the material and application. The CNC engraving machine takes into account the maximum allowed cutting depth of the tool and moves step by step to the desired engraving depth. Only in this way can optimum cutting data be run, which leads to better workpiece qualities, process times and tool life.

CNC milling machine - Patented probe for height correction

Patented measuring system for the application of a Z-height correction in our CNC engraving machine

More information of Engraving Machine

bottom of page